smartctl 7.5 2025-04-30 r5714 [x86_64-linux-7.1.9-200.fc44.x86_64] (local build) Copyright (C) 2002-25, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Seagate Video 3.5 HDD Device Model: ST1000VM002-1CT162 Serial Number: S1G2ZQ7A LU WWN Device Id: 5 000c50 06c6410d4 Firmware Version: SC23 User Capacity: 1.000.204.886.016 bytes [1,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5900 rpm Form Factor: 3.5 inches Device is: In smartctl database 7.5/6204 ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Sat Sep 19 23:05:08 2026 WIB SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM level is: 192 (intermediate level without standby) Rd look-ahead is: Enabled Write cache is: Enabled DSN feature is: Unavailable ATA Security is: Disabled, frozen [SEC2] === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 107) seconds. Offline data collection capabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 129) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x10b9) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-- 114 099 006 - 68120968 3 Spin_Up_Time PO---- 097 097 000 - 0 4 Start_Stop_Count -O--CK 087 087 020 - 13699 5 Reallocated_Sector_Ct PO--CK 100 100 036 - 0 7 Seek_Error_Rate POSR-- 080 060 030 - 13283701425 9 Power_On_Hours -O--CK 067 067 000 - 29187 10 Spin_Retry_Count PO--C- 100 100 097 - 0 12 Power_Cycle_Count -O--CK 096 096 020 - 4760 184 End-to-End_Error -O--CK 100 100 099 - 0 187 Reported_Uncorrect -O--CK 092 092 000 - 8 188 Command_Timeout -O--CK 096 096 000 - 85900787756 189 High_Fly_Writes -O-RCK 017 017 000 - 83 190 Airflow_Temperature_Cel -O---K 059 048 045 - 41 (Min/Max 29/43) 191 G-Sense_Error_Rate -O--CK 100 100 000 - 0 192 Power-Off_Retract_Count -O--CK 097 097 000 - 7407 193 Load_Cycle_Count -O--CK 094 094 000 - 13782 194 Temperature_Celsius -O---K 041 052 000 - 41 (0 16 0 0 0) 197 Current_Pending_Sector -O--C- 100 100 000 - 0 198 Offline_Uncorrectable ----C- 100 100 000 - 0 199 UDMA_CRC_Error_Count -OSRCK 181 181 000 - 1733 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 5 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters log 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa1 GPL,SL VS 20 Device vendor specific log 0xa2 GPL VS 4496 Device vendor specific log 0xa8 GPL,SL VS 129 Device vendor specific log 0xa9 GPL,SL VS 1 Device vendor specific log 0xab GPL VS 1 Device vendor specific log 0xb0 GPL VS 5176 Device vendor specific log 0xbd GPL VS 512 Device vendor specific log 0xbe-0xbf GPL VS 65535 Device vendor specific log 0xc1 GPL,SL VS 10 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (5 sectors) Device Error Count: 8 CR = Command Register FEATR = Features Register COUNT = Count (was: Sector Count) Register LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH = LBA High (was: Cylinder High) Register ] LBA LM = LBA Mid (was: Cylinder Low) Register ] Register LL = LBA Low (was: Sector Number) Register ] DV = Device (was: Device/Head) Register DC = Device Control Register ER = Error register ST = Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 8 [7] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:48.251 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:47.344 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:47.263 NOP [Abort queued commands] 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:43.813 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:42.907 SET FEATURES [Enable write cache] Error 7 [6] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:43.813 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:42.907 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:42.821 NOP [Abort queued commands] 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:39.368 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:39.344 SET FEATURES [Enable write cache] Error 6 [5] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:39.368 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:39.344 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:39.222 NOP [Abort queued commands] 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:35.768 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:35.734 SET FEATURES [Enable write cache] Error 5 [4] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:35.768 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:35.734 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:35.642 NOP [Abort queued commands] 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:32.190 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:32.190 READ FPDMA QUEUED Error 4 [3] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:32.190 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:32.190 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:32.156 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:32.033 NOP [Abort queued commands] 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:28.586 READ FPDMA QUEUED Error 3 [2] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6c 57 c8 40 00 00:00:28.586 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:28.569 READ FPDMA QUEUED 60 00 00 00 80 00 00 01 3d 05 c0 40 00 00:00:28.569 READ FPDMA QUEUED ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:28.531 SET FEATURES [Enable write cache] 00 00 00 00 00 00 00 00 00 00 00 00 ff 00:00:28.444 NOP [Abort queued commands] Error 2 [1] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 80 00 00 01 3d 05 c0 40 00 00:00:25.006 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:24.984 READ FPDMA QUEUED 60 00 00 00 08 00 00 00 6e 57 30 40 00 00:00:24.984 READ FPDMA QUEUED ec 00 00 00 00 00 00 00 00 00 00 a0 00 00:00:24.961 IDENTIFY DEVICE ef 00 02 00 00 00 00 00 00 00 00 a0 00 00:00:24.906 SET FEATURES [Enable write cache] Error 1 [0] occurred at disk power-on lifetime: 7757 hours (323 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- == -- == == == -- -- -- -- -- 40 -- 51 00 00 00 00 00 6c 57 c8 00 00 Error: UNC at LBA = 0x006c57c8 = 7100360 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name -- == -- == -- == == == -- -- -- -- -- --------------- -------------------- 60 00 00 00 08 00 00 00 6e 57 30 40 00 00:00:21.110 READ FPDMA QUEUED 60 00 00 00 10 00 00 00 6c 57 c8 40 00 00:00:21.094 READ FPDMA QUEUED 60 00 00 00 20 00 00 00 6c 57 38 40 00 00:00:21.094 READ FPDMA QUEUED 60 00 00 00 20 00 00 18 6a 08 00 40 00 00:00:21.054 READ FPDMA QUEUED 60 00 00 00 10 00 00 18 6a 08 00 40 00 00:00:21.053 READ FPDMA QUEUED SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 00% 9991 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. SCT Status Version: 3 SCT Version (vendor specific): 522 (0x020a) Device State: Active (0) Current Temperature: 41 Celsius Power Cycle Min/Max Temperature: 29/43 Celsius Lifetime Min/Max Temperature: 17/52 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 2 minutes Temperature Logging Interval: 94 minutes Min/Max recommended Temperature: 1/61 Celsius Min/Max Temperature Limit: 2/60 Celsius Temperature History Size (Index): 128 (14) Index Estimated Time Temperature Celsius 15 2026-09-11 15:26 ? - 16 2026-09-11 17:00 40 ********************* 17 2026-09-11 18:34 ? - 18 2026-09-11 20:08 39 ******************** 19 2026-09-11 21:42 ? - 20 2026-09-11 23:16 40 ********************* 21 2026-09-12 00:50 ? - 22 2026-09-12 02:24 40 ********************* 23 2026-09-12 03:58 ? - 24 2026-09-12 05:32 40 ********************* 25 2026-09-12 07:06 ? - 26 2026-09-12 08:40 40 ********************* 27 2026-09-12 10:14 ? - 28 2026-09-12 11:48 39 ******************** 29 2026-09-12 13:22 ? - 30 2026-09-12 14:56 39 ******************** 31 2026-09-12 16:30 ? - 32 2026-09-12 18:04 40 ********************* 33 2026-09-12 19:38 ? - 34 2026-09-12 21:12 39 ******************** 35 2026-09-12 22:46 ? - 36 2026-09-13 00:20 39 ******************** 37 2026-09-13 01:54 ? - 38 2026-09-13 03:28 39 ******************** 39 2026-09-13 05:02 ? - 40 2026-09-13 06:36 39 ******************** 41 2026-09-13 08:10 ? - 42 2026-09-13 09:44 39 ******************** 43 2026-09-13 11:18 ? - 44 2026-09-13 12:52 39 ******************** 45 2026-09-13 14:26 ? - 46 2026-09-13 16:00 33 ************** 47 2026-09-13 17:34 ? - 48 2026-09-13 19:08 29 ********** 49 2026-09-13 20:42 ? - 50 2026-09-13 22:16 29 ********** 51 2026-09-13 23:50 ? - 52 2026-09-14 01:24 29 ********** 53 2026-09-14 02:58 35 **************** 54 2026-09-14 04:32 35 **************** 55 2026-09-14 06:06 36 ***************** 56 2026-09-14 07:40 37 ****************** 57 2026-09-14 09:14 38 ******************* 58 2026-09-14 10:48 38 ******************* 59 2026-09-14 12:22 38 ******************* 60 2026-09-14 13:56 37 ****************** 61 2026-09-14 15:30 39 ******************** 62 2026-09-14 17:04 39 ******************** 63 2026-09-14 18:38 39 ******************** 64 2026-09-14 20:12 36 ***************** ... ..( 2 skipped). .. ***************** 67 2026-09-15 00:54 36 ***************** 68 2026-09-15 02:28 35 **************** 69 2026-09-15 04:02 36 ***************** 70 2026-09-15 05:36 36 ***************** 71 2026-09-15 07:10 38 ******************* 72 2026-09-15 08:44 38 ******************* 73 2026-09-15 10:18 39 ******************** 74 2026-09-15 11:52 38 ******************* 75 2026-09-15 13:26 ? - 76 2026-09-15 15:00 40 ********************* 77 2026-09-15 16:34 ? - 78 2026-09-15 18:08 29 ********** 79 2026-09-15 19:42 36 ***************** 80 2026-09-15 21:16 38 ******************* 81 2026-09-15 22:50 38 ******************* 82 2026-09-16 00:24 39 ******************** 83 2026-09-16 01:58 38 ******************* 84 2026-09-16 03:32 38 ******************* 85 2026-09-16 05:06 38 ******************* 86 2026-09-16 06:40 37 ****************** 87 2026-09-16 08:14 40 ********************* 88 2026-09-16 09:48 ? - 89 2026-09-16 11:22 39 ******************** 90 2026-09-16 12:56 ? - 91 2026-09-16 14:30 29 ********** 92 2026-09-16 16:04 ? - 93 2026-09-16 17:38 29 ********** 94 2026-09-16 19:12 35 **************** 95 2026-09-16 20:46 36 ***************** 96 2026-09-16 22:20 36 ***************** 97 2026-09-16 23:54 37 ****************** 98 2026-09-17 01:28 37 ****************** 99 2026-09-17 03:02 38 ******************* ... ..( 2 skipped). .. ******************* 102 2026-09-17 07:44 38 ******************* 103 2026-09-17 09:18 37 ****************** 104 2026-09-17 10:52 41 ********************** ... ..( 2 skipped). .. ********************** 107 2026-09-17 15:34 41 ********************** 108 2026-09-17 17:08 40 ********************* 109 2026-09-17 18:42 35 **************** 110 2026-09-17 20:16 40 ********************* 111 2026-09-17 21:50 41 ********************** 112 2026-09-17 23:24 43 ************************ 113 2026-09-18 00:58 44 ************************* 114 2026-09-18 02:32 43 ************************ 115 2026-09-18 04:06 41 ********************** 116 2026-09-18 05:40 40 ********************* 117 2026-09-18 07:14 43 ************************ 118 2026-09-18 08:48 42 *********************** 119 2026-09-18 10:22 41 ********************** 120 2026-09-18 11:56 42 *********************** 121 2026-09-18 13:30 ? - 122 2026-09-18 15:04 30 *********** 123 2026-09-18 16:38 36 ***************** 124 2026-09-18 18:12 37 ****************** 125 2026-09-18 19:46 38 ******************* 126 2026-09-18 21:20 39 ******************** ... ..( 2 skipped). .. ******************** 1 2026-09-19 02:02 39 ******************** 2 2026-09-19 03:36 42 *********************** 3 2026-09-19 05:10 41 ********************** 4 2026-09-19 06:44 ? - 5 2026-09-19 08:18 29 ********** 6 2026-09-19 09:52 40 ********************* 7 2026-09-19 11:26 42 *********************** 8 2026-09-19 13:00 42 *********************** 9 2026-09-19 14:34 40 ********************* 10 2026-09-19 16:08 42 *********************** 11 2026-09-19 17:42 40 ********************* 12 2026-09-19 19:16 39 ******************** 13 2026-09-19 20:50 39 ******************** 14 2026-09-19 22:24 42 *********************** SCT Error Recovery Control: Read: Disabled Write: Disabled Device Statistics (GP/SMART Log 0x04) not supported Pending Defects log (GP Log 0x0c) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x000a 2 1776 Device-to-host register FISes sent due to a COMRESET 0x0001 2 1718 Command failed due to ICRC error 0x0003 2 1722 R_ERR response for device-to-host data FIS 0x0004 2 1 R_ERR response for host-to-device data FIS 0x0006 2 45 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS