

[QIPCALL:ImsVoiceSuppsConfig]

#This config is required to end the conference call automatically
#when all other participants left the call.

*endConfCallBasedOnUserCountNode = 1

*endConfCallUponNoParticipant = 1

#This config is required to configure the dialog for the
#conference event subscribe request.

*confEvtSubOutOfDialog = 0


[QIPCALL:ImsVoiceConfig]

#This config is required to configure the default URI type
#(SIP/TEL) for MO calls.
#
#Possible INTEGER values for the enum are as follows:
#QPE_IMS_URI_INIT = 0,                       enum value 0
#QPE_IMS_URI_SIP = QPE_IMS_URI_INIT,         enum value 0
#QPE_IMS_URI_TEL,                            enum value 1
#QPE_IMS_URI_ANY,                            enum value 2
#QPE_IMS_URI_MAX                             enum value 3

*uriType = QPE_IMS_URI_TEL

#This config is required to configure if VOLTE capability can be impacted by mobile data.

*volteImpactedByDataSetting = 0

#This config is required to enable 380 response validation as per
#3GPP.

*enableAlternateSrvRspCheck = 0


[QIPCALL:ImsVideoConfig]

#This config is required to configure if VT capability can be impacted by mobile data.

*vtImpactedByDataSetting = 0


[Ut:XCAPCommonHC]

#This config item controls the configuration of BSF server address

*bsfServerAddress = "bsf.mnc011.mcc510.pub.3gppnetwork.org:80"


[SIPConfig:IPSec]

#integrity scheme for ipsec sip messages
#Possible INTEGER values for override Integrity Algorithm mask values are as follows:
#0 --> Invalid - none of the algorithm is supported
#1 --> alg=hmac-sha-1-96
#2 --> alg=hmac-md5-96
#3 --> alg=hmac-sha-1-96 and alg=hmac-md5-96

*IntScheme = 3

[MEDIA:MediaCommon]

#This config item specifies maximum mtu size for the rtp packet

*mtuSize = 1300

#This config is DL DTMF Mode.
#enum -
#QP_DTMF_PB_NONE = 0,
#QP_DTMF_PB_ADSP = 1,
#QP_DTMF_PB_HLOS = 2,
#QP_DTMF_PB_ADSP_HLOS = 3,
#QP_DTMF_PB_MAX

*DLDtmfMode = 1


[SIPConfig:FeatureFlags]

#enable or disable sip instance inclusion in contact header

*IsSipInstanceNeeded = 1


[QIPCALL:ImsRtcpConfig]

#This config is required to configure the timer for RTCP
#monitoring.

*rtcpLinkAlivenessTimer = 120


[QIPCALL:ImsVoiceSrvccConfig]

#This config is required to enable SRVCC based on contact header FT.

*enableSRVCCOnContactHeader = 1

#This config is required to enable bSRVCC.

*bSrvccEnabled = 1

#This config is required to enable aSRVCC.

*aSrvccEnabled = 1

#This config is required to enable mid call SRVCC.

*midcallSrvccEnabled = 1


[QIPCALL:AMR_0]

#This config is bandwidth.
#enum - BW_NW, BW_WB

BandWidth = BandWidth_NB

#This config is modeset.

ModeSet = 0

#This config is mode.
#enum - AMR_MODE_BE, AMR_MODE_OA

Mode = AMR_MODE_BE


[QIPCALL:AMR_1]

#This config is bandwidth.
#enum - BW_NW, BW_WB

BandWidth = BandWidth_WB

#This config is modeset.

ModeSet = 0

#This config is mode.
#enum - AMR_MODE_BE, AMR_MODE_OA

Mode = AMR_MODE_BE


[QIPCALL:H264_0]

#This config is to specify the profile for H264. Only use value 1

profile = 1

#Preffered resolution. Possible values:
#INVALID_RESOLUTION = 0,
#PORTRAIT_SQCIF_RESOLUTION,    // 1
#LANDSCAPE_SQCIF_RESOLUTION,   // 2
#PORTRAIT_QQVGA_RESOLUTION,    // 3
#LANDSCAPE_QQVGA_RESOLUTION,   // 4
#PORTRAIT_QCIF_RESOLUTION,     // 5
#LANDSCAPE_QCIF_RESOLUTION,    // 6
#PORTRAIT_QVGA_RESOLUTION,     // 7
#LANDSCAPE_QVGA_RESOLUTION,    // 8
#PORTRAIT_CIF_RESOLUTION,      // 9
#LANDSCAPE_CIF_RESOLUTION,     // 10
#PORTRAIT_VGA_RESOLUTION,      // 11
#LANDSCAPE_VGA_RESOLUTION,     // 12
#PORTRAIT_HD_720_RESOLUTION,   // 13
#LANDSCAPE_HD_720_RESOLUTION,  // 14

*resolution_preferred = 11

#Preffered Framerate

*framerate_preferred = 15

#payload type for packetization mode 0. number above 96

*payload_type_packetization_mode0 = 113

#Codec level. possible values:
#INVALID_LEVEL = 0x00,
#Level 1 = 0x01,
#Level 1B = 0x02,
#Level 11 = 0x03,
#Level 12 = 0x04,
#Level 13 = 0x05,
#Level 2 = 0x06,
#Level 21 = 0x07,
#Level 22 = 0x08,
#Level 3 = 0x09,
#Level 31 = 0x0A,
#Level 32 = 0x0B,
#Level 4 = 0x0C,
#Level 41 = 0x0D,
#Level 42 = 0x0E,
#Level 5 = 0x0F,
#Level 51 = 0x10

*level = 8

#payload type for packetization mode 1. number above 96 and
#different from packetization mode 0

*payload_type_packetization_mode1 = 114


[QIPCALL:H264_1]

#This config is to specify the profile for H264. Only use value 1

profile = 1

#Preffered resolution. Possible values:
#INVALID_RESOLUTION = 0,
#PORTRAIT_SQCIF_RESOLUTION,    // 1
#LANDSCAPE_SQCIF_RESOLUTION,   // 2
#PORTRAIT_QQVGA_RESOLUTION,    // 3
#LANDSCAPE_QQVGA_RESOLUTION,   // 4
#PORTRAIT_QCIF_RESOLUTION,     // 5
#LANDSCAPE_QCIF_RESOLUTION,    // 6
#PORTRAIT_QVGA_RESOLUTION,     // 7
#LANDSCAPE_QVGA_RESOLUTION,    // 8
#PORTRAIT_CIF_RESOLUTION,      // 9
#LANDSCAPE_CIF_RESOLUTION,     // 10
#PORTRAIT_VGA_RESOLUTION,      // 11
#LANDSCAPE_VGA_RESOLUTION,     // 12
#PORTRAIT_HD_720_RESOLUTION,   // 13
#LANDSCAPE_HD_720_RESOLUTION,  // 14

*resolution_preferred = 11

#Preffered Framerate

*framerate_preferred = 30

#payload type for packetization mode 0. number above 96

*payload_type_packetization_mode0 = 115

#Codec level. possible values:
#INVALID_LEVEL = 0x00,
#Level 1 = 0x01,
#Level 1B = 0x02,
#Level 11 = 0x03,
#Level 12 = 0x04,
#Level 13 = 0x05,
#Level 2 = 0x06,
#Level 21 = 0x07,
#Level 22 = 0x08,
#Level 3 = 0x09,
#Level 31 = 0x0A,
#Level 32 = 0x0B,
#Level 4 = 0x0C,
#Level 41 = 0x0D,
#Level 42 = 0x0E,
#Level 5 = 0x0F,
#Level 51 = 0x10

*level = 9

#payload type for packetization mode 1. number above 96 and
#different from packetization mode 0

*payload_type_packetization_mode1 = 116


[QIPCALL:ImsMediaProfileConfig]

#This config is required to video codec profile list on 4G.

*VideoProfile1 = "H264_0;H264_1"

#This config is required to audio codec profile list.

*AudioProfile1 = "AMR_1_104;AMR_0_102"


